Tech Tip - Graco Fusion AP Mixing Chambers
Posted By DEMILEC
Graco Fusion AP mixing chambers canbe damaged or broken during foam processing.
The sprayer should focus on two areas or the gun if the mixing chamber breaks.
1. Make sure the air cap is installed correctly. The front of the mixing
chamber should be flush with the face of the air cap. If the mixing chamber
is pertruding past the air cap face, you will need to replace the air
cap. This can cause the air cap to hit the front of the black fluid housing
and cause damage to the gun.
2. Make sure the Black Fluid housing is attached correctly to the silver
gun handle. If the black fluid houseing is not attached tight to the handle
this can cause mixing chambers to break and also cause damage and wear
to the gun.
As always read, understand and follow all instruction manuals and warning
labels supplied with all equipment. Only trained and qualified personnel
should perform repairs on the equipment. To access the latest equipment