PREMTEC U - 200


Polyurea PREMTEC U - 200 is a family of membranes that are exceptionally tough and flexible to resist thermal stresses to compensate for substrate cracking or movement and provide impact resistance. These membranes are spray-applied plastic coatings that eliminate all seams regardless of steel, polyrethane foams and concrete containment structures or, used for geotextile applications, offering as UV stable and chemical resistant membrane. The 100% solids, VOC free and oderless rapid cured products follow any contour and provide a monolithic containment barrier.
Recommended applications.

  • Leakproof membranes for chemical storage and/or for underground dump sites to prevent leakage or spills of liquid waste or toxic products.
  • Waterproofing and protecting walls, ceiling and roofs.
  • Impervious membrane for tunnels, dykes, ponds, concrete basins, septic tanks and reservoirs.
  • Sealant for cracks ( metal, pavement, concrete ).
  • Protective encapsulation for polyurethane and polystyrene foams.
Quick and professional application.

Quick and professional application by an approved installer network across North America to assure you that your project is completed correctly, safely and on time

Our critiria for approving applicators :

  • Experience.
  • Quality workmanship.
  • Integrity.
  • Financial stability.

SOME FEATURES

  • Fast cure: can be walked-on in 30 seconds and has no odour and no V.O.C.'s.
  • Resilient and resistant to high abrasion, impact and chemicals.
  • Resists thermal shock.
  • Bridges cracks to 1/16".
  • Potable water accepted (BNQ)
  • Canadian Food Inspection Agency approved
  • Waterproof
  • Can be spray applied to any thickness in a single application.
  • Bonds to a wide variety of substrates and easy to repair when damaged.
  • Smooth and seamless facilitating quick spill clean-up.

Premilec also manufactures the following membranes.

  • Premtec HA-55 and HA-80 spray protective urethane elastomers 100% solids.
  • Premtec ST-76 urethane stuctural spray 100% solid with or without fibre glass.

THE " PREMTEC " PRODUCT LINE
1) STRUCTURAL POLYURETHANE SPRAY SYSTEMS.
Products Type Description
Series ST-76 MDI Two component polyurethane used in spray application to create quality composites with little or no fiberglass reinforcements. Can be applied to acrylic or ABS sheets, polyester gel coats and polyurethane coatings.
2) POLYUREA SPRAY MEMBRANES.
Products Type Description
Series U-200 MDI / polyamines Two component spray polyurea systems used as a containment membrane with or without geotextile fabric.
3) POLYURETHANE SPRAY MEMBRANES.
Products Type Description
HA-86 MDI Two component spray polyurethane system with a Shore hardness of 86 A used to provide sound deadening, heat retention, low temperature performance, impact resistance.
4) RESIN TRANSFER MOLDING (RTM) POLYURETHANE SYSTEM.
Products Type Description
Serie ST-81 MDI Two component polyurethane systems used in resin transfert molding (RTM), a low-pressure, closed-mold process.


( TOP )